Monthly Archives: August 2012

Home Flooring Upgrade – Refinish Or Replace?

by admin

Wood flooring has certainly advanced since the floors we had in our homes when we were children. The technology used in today’s flooring manufacturing eliminates the required waxing. Neither do we always need the expertise of floor installation professionals. Pre-finished products we have today also eliminate the old process of labor intensive sanding and finishing so DIY flooring projects are not out of the ordinary.

Back in the day, red oak was the typical selection for interior flooring. Present day flooring shoppers have many options for texture and color. It can be a difficult task selecting the right floor match that will mesh with the interior of your home. You should spend plenty of time researching the types and colors with online vendors or by visiting a local home improvement or supply store.

Once you have purchased your flooring you should always allow it time to get used to the room’s humidity by leaving it stacked in the room for a few days.

The wood will expand when it is exposed to the moisture. The edges of the room needs room for the wood to expand so you should leave a half inch gap when laying the floor. You can always cover the gap with some type of molding.

DIY doesn’t mean without direction so you should always follow the manufacturer’s installation instructions. Your floors may not look professional if you fail to properly install. Today’s flooring is micro-beveled in the factory so spacing isn’t an issue for summertime expansion.

Due to scratches or traffic wear you may be considering new wood flooring. If this is the case, you may want to consider refinishing the floors you have now, which will be an economical solution.

Start by removing all contents in the room that touch the floor. By keeping windows and doors shut you will reduce excessive dust. You should allow 3-5 days for sanding and refinishing before moving furniture and other items back into the room.

If you’re simply looking to enhance the appearance of the floors in your home, you should take a look at laminate flooring. The appearance looks like wood and requires minimal maintenance.Laminate is also resistant to stains and scratches caused by children and pets. It’s a snap to lay with a tongue and groove interlocking system.

Technology is widely used today in producing refinishing and flooring products. Allow yourself plenty of time to explore all options before purchasing.Floor products are substantially easier to use now. By properly researching your options and following directions, your final product will be something you can truly be proud of.

Visit World Floors Direct for more information on new flooring products and tips on installing bamboo, wood and cork flooring.

Find More Replace Floors Articles

Buying New Flooring: Which Floors Work Best?

by admin

If you’re confused by the dazzling array of flooring terms, and don’t know your resilient from your red oak – don’t worry. This quick guide will take the guesswork out of finding the perfect flooring for any room. Whether you’re redecorating a bedroom or renovating a bathroom, you’ll be able to choose the right floors for any project – large or small.

For the Busiest Rooms in the Home – Choose Laminate or Carpet
It’s understandable that certain areas of your home get more foot traffic than others. Stairways, hallways and entryways can all see their share of spills, slips and stains. Laminate, a durable alternative to hardwood, is an excellent choice for your busiest rooms because of its reliability and easy maintenance. Laminate never needs to be re-sanded or re-finished and won’t bend, bow or fade over time like cheaper flooring can.

If you need flooring with a softer step, carpet is the perfect solution. It’s ideally suited for any room in your home that isn’t prone to moisture or humidity. Plus, with new advances in carpeting technology, you can buy carpets that are highly stain-resistant, or carpets that are eco-friendly.

For Moisture-Prone Areas – It Doesn’t Get Any Better than Tile
Ceramic tile is one of the most popular choices for moisture prone areas of a home – including the kitchen, bathrooms or entryways. Not only does tile flooring make clean-up a breeze, it’s also easy to design a creative look that matches your kitchen or bath décor. It’s best to have tile professionally installed to ensure that it continues to look and perform at its best for years to come. With proper care and maintenance, tile floors can remain nearly impervious to moisture and humidity.

Create a Look that’s the Centerpiece of Any Room with Hardwood
When you want only the very best, it’s hard to been the authentic appeal of hardwood flooring. From popular homegrown favorites like maple and oak, to exotic species like Brazilian cherry, nothing captures attention and creates lasting appeal like hardwood floors. Few other types of flooring can outlast the durability and charm of hardwood. And if you want an investment that will continue to pay you back year after year – hardwood is hard to beat. The fact is, traditional hardwood floors are versatile enough to complete any room – from rustic to modern and every style in between. What’s more, real hardwood floors can increase the selling value of any home by hundreds or even thousands of dollars. And hardwood continues to grow in character year after year, showing its unique, natural beauty as it ages.

These are just a few of the many types of flooring available for your home. To get more detailed information, as well as warranties and guarantees and installation help, it’s a good idea to consult with a flooring specialty store. Here, you’ll be able to browse carpet swatches and flooring samples as well as get flooring care tips on how to make your investment last even longer.

Janine Green writes about different home improvement ideas with flooring out of Toronto. Always looking for the highest quality materials at the best prices, she tends to end up shopping at http://www.carpetone.ca more often than not.
 

More New Floors Articles

New timber floors Sydney

by admin

Timber Floors Pty Ltd are the family friendly choice for supply and installation of timber flooring in Sydney.

Modernising your home renovation can be difficult and stressful but choosing a wooden floor provides a hassle free and stylish way to put your worries behind you.

John Bruker with over 51 years experience and director of Timber Floors Pty Ltd has the enviable reputation of being at the helm of the leading company that supplies and installs timber flooring in and around Sydney. The first choice of many of Sydney’s leading designer builders for one reason Timber Floors does not compromise on quality and workmanship.

The demand for Wood floors has risen dramatically over the past few years, for a few simple reasons; it’s more affordable, durable and it is not restricted to fashion trends as it never goes out of style. The nature of hardwood floors means that it’s simply the best way to showcase your home.

Young families and professionals “time poor” are behind this stylish trend as the ease with which it is to maintain a wood floor means it suits the hustle and bustle of a hectic lifestyle. If you spill something or walk in with dirty shoes wooden floors are easily cleaned and being a natural material are a lot more durable.

With dirt, animal hair, illness and allergies, bacteria and germs can fester amongst the dirt and become a potential health risk in other flooring options. More and more people are deciding on timber flooring due the fact it doesn’t harbour allergens, micro-organisms or harmful pesticides. If small children in particular are in the house this can be a problem. Timber flooring does not have these worries due its hypo-allergic qualities.

Timber Floors Pty Ltd have especially developed their own unique system of preparation and installation over concrete slabs especially for the Asthma and allergy sufferer initially in mind, but it is now common place in all our floors over concrete. This system has been developed over the last 18 years to a tried and tested format that literally hundreds of satisfied customers are testament to in their flooring reviews.

Bearers and Joists construction methods in the early years meant that timber floors were common place, however most were always meant to be covered with either carpet or linoleum as was the fashion. If you had a polished timber floor most weekends meant the tiresome waxing of the floors a task no one looked forward to. Thankfully with the modern finishes now available; those days are gone. Additionally the modern method of kiln drying timber means new floors with all their variations of colours and grain are a bonus decorating feature.

Timber floors can offer a contemporary feel to a home, something we all strive for, and what started out as a trend that was restricted to the more affluent end of town has now filtered down as the stylish way to go about home improvement.

If you are environmentally conscious and do not wish to have a large carbon footprint, then wood flooring is a brilliant step forward. The large majority of timber flooring is sourced from renewable forests to ensure that for every tree used, another will be planted in its place. At Timber Floors Pty Ltd we strongly support Australian Mills that follow Sustainably Managed Forest Programs.

John Bruker is the oldest timber flooring specialist in Sydney having worked with Australian Hardwoods for over 51 years and the founder of Timber Floors Pty Ltd, still active in overseeing the day to day runnings of arguably one of Sydney’s most innovative installers of hardwood flooring.

Find More New Floors Articles

Replacing Flooring: Prepare the Old Before Installing the New

by admin

You purchased new flooring for your home. You’re excited about how the room will look. You have a limited budget, so you plan on installing the new surface yourself. Carpet and carpet padding can be pulled away from the base or sub-floor, rolled up, and taken to the curb or the dump. Tile or vinyl can be chipped away and pried off the sub-floor, loaded into a garbage can and taken out, too. But what then? Is that all there is to preparing for installation? Unfortunately, the answer is a no. If lining it up, connecting it, and fastening it down was all there was to it, there would be far fewer contractors making a living. The primary step in any replacement is removing the old material and flaws first.

The key to lovely, long lasting flooring reaches not over the surface but under it.

Laying new tile is time consuming enough without having to replace it again in just a few years, because the sub-floor or slab wasn’t prepared properly, and cracks, sliding, or snapping of material has wasted time, effort, and money.

The surface receiving the new material must be clean and absolutely smooth. Even small grains of dirt or sand can void a seal or connection, as well as create gaps and bulges that stress the new material. If placing tile, for instance, over old, worn hardwood planks, ensure the seams between the boards are sealed level; nails and screws are sunk below the surface of the wood and filled with a wood fill compound, and the boards themselves are level, well sanded, and thoroughly cleaned, including washing—not just sweeping or dusting. Also, ensure the receiving surface is completely dry; allow sufficient time for air drying before laying a new surface on top of it.

Caution areas include slab sub-floors, walls, and entry ways.

Slabs require additional waterproofing protection before laying new flooring on top of it.

Most contractors automatically place a material over the slab between the concrete and the new material to allow moisture drawn up through the slab to evaporate before attaching itself to the underside of the new material.

Especially in older homes, vinyl tiles and linoleum was laid under the edges of walls and cabinets. Removing that layer can destabilize the structure and should be avoided. Instead,cut the old tile or linoleum as close to the resting edge as possible; if the material is soft enough, carefully angle a retractable blade down and in to cut the material under the edge but leave the remaining floor material in place. Gently slip the new flooring just under the structure’s edge to begin installation. Some experts recommend not using glue on the first one-half inch of the new floor material to allow removal next time the material is replaced, but always leave the original under the bulk structure alone.

When replacing entry way flooring, special challenges occur. Because the door frame is set into the wall structure, the new wood, tile, or carpet must allow the door to open and close fully, lest problems arise. You should replace the sub-floor or build up the sub-floor to allow proper spacing and depth. If that’s not possible, trimming the bottom of the door, if possible, is the next option. If you have a metal door, you may have to remove the entire door frame and adjust the opening to allow a higher floor clearance, depending on the floor material you’ve chosen.

If you choose to raise the door frame, you may want to install a support post under the house or otherwise brace the house frame. Tensions and tolerances are determined for the original framing configuration, and adjusting the height of a doorway may degrade stability without the additional support.

How To Repaint Your Plastic Duck Decoy

by admin

A lot of professional duck hunters prefer to make use of plastic duck decoys during their duck hunting expeditions. These duck decoys can be used for a long period of time in order to hunt wild ducks. It is also equally important to maintain these duck decoys which are made form plastic in the right manner so that they will serve the purpose of enticing ducks in the wilderness. Hence these duck decoys of plastic will require a fresh coat of paint at regular intervals so that they will continue to serve their purpose. This paint can also be used in order to provide a coat of touch up for these plastic duck decoys.
It is possible to repaint and recreate these duck decoys without having to purchase a fresh painting kit. Durable acrylic paints can be used in order to paint these decoys and it is possible to find these paints at any outlet of home depot or Wal-Mart. There are also many products which have been introduced which will help in protecting these decoys after they have been repainted in order to retain the freshness. This will also ensure that the paint will last for a longer period of time.
The first step which needs to be remembered while repainting a duck decoy is that the surface which needs to be repainted will have to be prepared well before the actual process of repainting is started. This rule is also applicable when duck decoys made of cork or foam are being repainted. The next step which needs to be taken is that the surface of the duck decoy made of plastic will have to be scrubbed completely.
A wire brush will have to be used in order to scrub the surface of the duck decoy which is made by plastic. The wires which can be found in this wire brush will help in removing all the extra dirt and paint which will be found inside the smallest crevices. But the person who is doing the scrubbing should take care that all the paint does not get removed from the surface of the plastic duck decoys. A good cleaner should also be used during this process of scrubbing in order to ensure that no form of residue has been left behind on the surface of the decoy. Then the decoy will have to be washed properly in water.
People who are repainting the duck decoy because the old paint has started peeling off should be aware that this could be due to the fact that the plastic has been contaminated. Acetone might be needed in such cases in order to clean and scrub the surface of the duck decoy and then repaint it once again. But people who are making use of acetone while painting a duck decoy made of plastic should also make sure that they follow all the instructions which have been provided on the acetone container which has been purchased. The person who is actually performing the task of repainting the duck decoy should remember that only the keel should be touched otherwise the oil on their hands could damage the paint.

We here at Paw Paws Outdoor Store are devoted to giving you the best shopping experience you can have. We are the proud providers of the best quality plastic duck decoys.

Home Repair Cost

by admin

Home Repair Cost have a direct relationship with the whole home sweet home ideology. Home is the sweetest place to be on the earth. There is no other place that feels as lively or as welcoming as one’s home. It is also a great feeling to own a house. There are certain things that a person has to deal with such as the cost of maintenance and home repair costs. These are normal parts of every household.

The costs of home repair depend on the extent of the damage incurred. Always gentle usage reduces the cost of repair that can be incurred as a result of harsh application. Apart from these expenditures, there are regular maintenance costs and upkeeps that a home requires.

Home repairing is always an extremely exhausting task. The home repair cost may seem to be like a never ending part of the household expenditures. If a person is totally new to the task, there is nothing that is as continuous and thankless as maintaining one’s home as the moment one fixes a part of the house, another problem arises in another part of the house.

One must enjoy this job as they should remember that they are repairing their own house not someone else’s. One must always be prepared for repair costs, while unforeseen expenditures cannot be avoided.

Home repair costs can be avoided in a few ways such as you can have a quick inspection and prepare a checklist of the problem areas. Many times the DIY techniques are enough to eradicate small activities such as waxing, cleaning and remodeling of floors. Similarly, even painting or gardening can be done without professional help. It is best to have a home insurance so that the costs of repairs or accidents are covered. It is very important to consult an attorney about the legal details of the working norms.

It is best to opt for home repair service providers and builders who take charge of the annual repair and maintenance.

Generally, it is best to avoid certain things that may lead to severe home repair costs. Firstly, never assign any task of home improvement to an outsider as you are breaking the laws. Hiring professional help for technical home improvements such as wiring, plumbing, roof repairing, gas lines, etc. Even the electric geysers or fireplace should not be repaired solely. Never tie-up with contractors outside the working contract as it may be considered invalid. Check with your home providers regarding the insurance details of home repair. Similarly, do not sign any legal documents with respect to work contract before scrutinizing.

One way to get your home repair costs under control is by asking for some help. There are such things as federal or government grants that you maybe able to apply for if you are in sincere need for home repair or improvement.

Home repair grant is one of the common problems faced by all homeowners. No one can skip or ignore any home repair as it leads to more crucial problems. But, as everyone cannot immediately arrange the finance required for home repair costs or do not have their home insurance and home finance in order, many times things get postponed and eventually results in paying more. There is a solution for such problems now. If you do not have enough home finance on hand, you can take a home repair grant for your home repairs as it is one of the ideal ways of home improvement for those in need.

Even now, many people are ignorant about the fact that federal grants are available for home repair and money is given to people who need it. The federal assistance is provided regardless of any economic status. All you have to provide is clear details of not having home finance and submitting the specifications of your home improvement requirements. Once approved by the federal grant, you will receive the required home grant so that you can do whatever repairs you need for your home. You can find the repair federal assistance by contacting your local government offices. You can contact them and acquire details of the various repair grants available and the requirements to qualify for them. They do not demand anything seriously, but for the evidence that you lack funds and you are in dire need of it. Occasionally, you have to provide a quotation stating how much money you need.

The quotation should be from a home improvement company that has government recognition. This quotation will ensure the government regarding the home grant, and it will also comprehend how the home finance for your repairs will be used. Grants are issued with proper scrutiny because these amounts are non-refundable. Being non-refundable grants, there is a wide scope for getting misused. The only desire of the government is that it ensures that the money is used as intended, to cover your repair costs, before it awards the home repair grant.

There are government home improvement loan schemes that help you with home projects that cannot wait any longer. You can avail various details through internet by searching the local government for repair grant and repair costs. People who qualify can surely get their grants sanctioned and moreover this money can be given gradually to enjoy your novel home without damaging your bank account. The process for home repair grant is identical to what you would do for a car or a home loan. The loans are available with lesser interest rate. However, you should look for best interest rates and try to get the best deal as there is an abundance of options available. Therefore reducing your out of pocket repair costs and having a considerable helping hand from the governments home grant.

Daniel Organ is the author and creator of http://homerepairsdiy.com/home-repair-costs.html and has first hand knowledge of re-modeling and repairing his families home. Daniel has researched all information as a guide only and for those who need specific help, can be referred to better information via the website.

Related Home Repair Articles

Replace A Cracked Floor Tile Easily

by admin

Somehow one of the tiles on your bathroom floor cracked. Luckily its a standard issue so finding a replacement wont be a problem. Sometimes hardware stores have a collection of random ones out back so be sure to ask if needed.

Ready to work? Your preparation should be as follows: wear goggles, have gloves (rubber and work) available, and apply painters or other heavy duty tape along the contours of the adjoining tiles to keep them protected.

Steps:

Using a carbide-tipped scoring tool grate the grout along the edges of the broken tile. Be careful not to apply too much pressure which may result in you breaking the neighboring tile.

Make the tile easier to chisel out: Using a nailset strike the tile in the middle or drill evenly spaced wholes in the broken tile. NOTE: careful not to perforate the foundation level too much. Its also good to have a vacuum handy to quickly dispense of small debris.

Remove the tile: Remember, youre not mining for gold. Banging lightly with a hammer, chisel out the broken tile until the space is clear. You can use a putty knife and brush or other small tools to aid you. If youre finding its not coming out as easy as you would like there may be an adhesive holding it in, which is normal. It will just take a bit more time.

Test the new tile: Placing it in the whole is anything obstructing a perfect fit causing it not to be level with the surrounding tiles? If so keep cleaning it out.

Adhesive: With a putty knife spread an adhesive on the bottom of the tile keeping some distance from the edge so it doesnt fill the gout crevices.

Placement: place the tile with adhesive in the hole wiggling it around a little, which helps spread the adhesive. Give it a little whack on top and make sure its even on all sides. Wait for it to dry, if necessary up to 24 hours.

Mixing gout: Mix it according to the directions and wearing rubber gloves push it into the crevices. You can use a piece of rubber of other semi-soft object to help you push it in. After it hardens for 15 minutes the excess can be cleaned up with a damp sponge.

Last step: give yourself a pat on the back

Jakob Barry writes for Networx.com where you can find more information about tile instillation.

Related Replace Floors Articles

Updating And Repainting Your Garage Door

by admin

If you are tired of your old, chipping, outdated garage door, it is time for some new paint. Changing the appearance of your garage door can completely change the look of your home.

It will protect it better from the elements of the outdoors, and will give your home a fresh new look at the same time. However, you do not need a professional to help you do this-with the right tools, you can do it yourself.

There are a few things which you should think about before you proceed. Make sure that you consider your paint type, your sheen, and the color.

There are two paint types for you to choose from to paint an exterior wood door. You can choose between latex and solvent-based.

Latex paint has the advantages of being easy to clean up with soap and water and of drying quickly. Solvent-based paint has to be cleaned up with paint thinner, and takes longer to dry.

But the color in oil paint tends to be brighter and last longer than latex paint. Whichever of the two types you choose make sure they are clearly marked for use outdoors.

The sheen refers to the top coat that goes over the paint. It determines how glossy or flat the paint will look when it is dry.

You can choose between gloss, semi-gloss, satin, or matte. When it comes to choosing color, pick something that will compliment the outside color scheme of the outside of your home.

You have the choice of one which blends will with your home, or works to compliment them in a new way. Before you start to paint, there are important steps you need to prepare to ensure that you do not cut any corners.

Taking the time now for thorough preparation will ensure you do the job right, and save you the time and frustration of having to re-do it later. Remove the door completely before you get started.

Prepare the surface. This is very important, because if you do not smooth down and wash the door, splinters and dirt will make it difficult for the color to properly adhere to the surface, and it will be at risk to flake off prematurely.

If the area has been painted in the past, sand it down with medium grade sandpaper to remove old, loose, and chipped color. If it is a new, you will only have to sand it very lightly with fine-grade sandpaper.

If there are any cracks or holes in it, fill them with wood filler, then sand the area. The goal is to get the surface as smooth as you possibly can.

When it comes to cleaning it down, wipe it down with a damp cloth. If the door needs it, wash it with a hose or a pressure washer.

Wait until a day when the temperature is going to be warm. This will make sure that all the moisture is gone before you begin.

Apply painter’s masking tape on the glass windows and the edges, to prevent paint from overlapping on to it. Apply tape as well to handles, brackets, and hinges to protect them from the paint.

Lay down drop cloths on the ground under the area where you will be painting, such as the floor, driveway, or lawn. Apply a primer coat first if you can.

It offers a protective base coat to new wood, and hides the original color underneath. If the original color is dark and still shows through, apply a second coat of primer.

Make sure the primer has completely dried before you proceed with the color you wish to use. Use the same brush you used with the primer, once they have been washed and dried.

Apply the paint by brushing in the same direction as the wood grain, not against it. When you dip your roller in the tray, make sure you do not pick up too much, as excess tends to drip and run down the surface.

Read the instructions on the can to determine if you need to apply a second coat. Generally, most high end quality ones only require one coat.

Once it is completely dry, it is done. Now you will be able to enjoy the new look to the outside of your home.

Tom Selwick has worked in the construction industry for years. He recommends garage door sacramento for getting the right garage door.

Contact Info:

Tom Selwick
TomSelwick09@gmail.com
http://www.deltadoorcompany.com

Related Repainting Home Articles

Home Staging and Redesign

by admin

What does your home look like? Most homeowners would say that they love their homes and that  they are quite livable and pretty. That might be true for you, but how about other people?

 

What do other people actually see when they look at your property? Often, the worst evaluators are the homeowners themselves because they all have selective memory.

 

They don’t want to see the flaws of their houses, as if this will help them sell the house at a higher price. So this is your first challenge as an aspiring home stager: see your home for what it really is.

The market is very competitive with more sellers than buyers. This results in longer listing periods and frustrated sellers having to wait for longer periods to get their homes sold.

Buyers have more options and can afford to take their time and be more demanding about what they buy.

So, as a seller how do you get your home sold quicker and also at the right price? The best course of action is to make your home more attractive than your competitors. Give buyers a compelling reason to choose your home over the multitude of other homes on the market. Motivate them to buy your home! Over deliver!

Here are a few simple yet effective Home Staging Design Tips

 

To get your home sold quicker you can take advantage of some these quick and easy methods to ‘refresh’ your own property before putting it on the market which will help significantly:

 

When a potential buyer comes into your house, we want them to imagine what it would be like to live in your house. We want the potential buyer to want to live in your house right at that moment

 

Remove your personal mementos because you want people to fully imagine themselves living in the various spaces of your home. Your identity as the home owner will detract from this.

 

You can stage the house gradually over a period of time or you can do it in just one fell swoop. Home staging typically involves the following steps:

 

Thorough cleaning of the property

 

Removing the clutter from the house

 

Repairing what needs to be repaired, inside and out

 

They say paint covers a multitude of imperfections. A coat of paint both inside and out will do wonders for your home and make it look new and fresh. Be sure to choose your colors carefully, you want to use only neutral colors when repainting your home. These give the home a broader appeal to your target market.

 

Second to walls the next thing that buyers notice the most is flooring. This is a window into the amount of care the home owner has taken of the property over the years. Worn or dirty carpets, scratched hardwood or broken tiles will definitely devalue the property in the buyers mind. Great care must be taken to repair broken tiles, and if your carpets are old and musty, you can invest in new carpets.

John James Walker is a home staging expert. For more great information
on Home Staging, visit
Home Staging Information.

Related Home Redesign Articles

Replacing Flood Damaged Flooring in Melbourne

by admin

If you have unfortunately been the victim of indoor flooding which has damaged your old flooring in Melbourne, you may be looking for a replacement. Hardwood flooring is a beautiful and dynamic way to update the look of your home, replace your damaged floor and to add a durable replacement.

The process of replacing your current flooring with timber floorboards in Melbourne can begin as soon as you make a phone call to inquire about flooring. When you speak with a professional, they will tell you that having hardwood flooring in Melbourne can be an excellent choice. They will set up an appointment to look at your home in order to decide which type of flooring is right for you. They will also tell you the numerous benefits of installing this type of flooring in your home.

The benefits of having timber floorboards in Melbourne are infinite.

Not only can timber flooring add value to your home, this type of flooring can last a lifetime. It is very stylish, and the durability of good quality hardwood can last longer than any other type of flooring on the market today. Even if the floors get scratches of scuffs, timber flooring can be sanded and repaired quickly and easily, making them look brand new. You certainly couldn’t say that about other types of flooring!

Choosing a professional company for hardwood flooring in Melbourne should bring service beyond compare, especially if you have damage from an unexpected flood. A good flooring company will remove your old, damaged flooring and make sure your room is completely dried out before installing any new flooring. It is imperative that all of the moisture is removed prior to setting up the base for timber flooring.

If there is still moisture, it could warp the floor permanently. Once the floor is completely dry, you will be able to choose batten or plywood to lie under your new floor. This ensures there is a flat base to lay the boards. Depending on the type of flooring you choose and the size of the room, you could be walking on your new floor within a few days or just a week after removal and installation begins.

With different grades and strengths of hardwood flooring available, deciding which one is best for you will depend on your lifestyle and family. The strength of hardwood is decided based on a scale called Janka hardness. The higher the Janka number, the harder the wood, which in turn means the more durable it is. If you have children or pets that may be rough on a floor, you would want to get a wood type that is high scoring on the Janka test.  With normal wear and tear, you can go with something with a lower score on the Janka test. Your dealer or installer will be able to give you more information.

When installing new flooring in Melbourne, choosing the best installer can be the difference between a lifelong floor and one that shifts or moves after installation. Reading reviews from other customers or asking friends or family where they got their flooring will be the best way to find a quality installer in Melbourne.

Looking for the best range of hardwood flooring Melbourne has to offer? Timber Flooring Group has the widest range and the best prices, with years of industry knowledge and experience Timber Flooring Group are the flooring Melbourne specialists. Contact TFG today.

More Replace Floors Articles