Monthly Archives: April 2017

Refinish Hardwood Floors

by admin

If your wooden floors have been covered by your carpet for quite some time or it’s been a long time since you’ve had those wood floors installed, they probably don’t look so good anymore. Waxing or buffing can make your floors shine, but if you really want your floors to look great, refinishing is needed. Refinishing can be messy but it’s a rewarding job.

To refinish floors, you need the following: a drum, floor or orbital sander, floor edger, buffer, putty knife and scraper, shop vacuum, lamb’s wool and a natural bristle brush or foam applicators, and tack cloths. Always use safety goggles, ear protection and a dust mask because sanding floors can be noisy and dusty.

Start by taking out furniture and rugs from the room. Use a pair of pliers to easily remove leftover carpet staples or tacks. Then hammer away exposed nails that can break the sanding machine. To contain dust and keep it from spreading elsewhere, hang plastic over the doorways and place rags or towels under doors. Sweep the floor clean afterwards. A drum sander can be frightening at first since it is big and noisy. It works quickly but if you’re not careful it can put an ugly groove in the floor that’s difficult to remove. If you’re not comfortable with one, switch to a floor sander. The newer orbital sanders are easier to use.

Use heavy grit sandpaper (30 grit) that will fit the machine. Then, sand in the direction of the wood grain using straight, even strokes. Never sand across the grain. When you’re finished, replace the heavy-grit sandpaper with a lighter grain sandpaper (60 grit) to eliminate sand scratches and lines in the floor. Repeat these steps with 80 grit and then 100 grit sandpaper for smooth, even floors. Clean the floors between sanding using a vacuum.

Apply polyurethane with a brush or roller. Use smooth, even strokes. Wait for the floor to dry in about 3 hours before giving it a second coat. Allow the final coat to dry overnight and return furniture and rugs in three days.

For a great selection of quality hardwood floors, area rugs, and more, visit FloorsASAP.com.

More Replace Floors Articles

Redefine Your Prefinished Floors With Prefinished Floors Refinishing NJ

by admin

Prefinished floors refinishing NJ offer flooring services to refinish your weathered, torn and aged prefinished floors. There are different types of prefinished floors such as laminated prefinished wood and engineered prefinished wood. Please take note that some of these types of prefinished floors cannot be refinished since they are not made of real wood.

It is the solid prefinished wood that can be sanded and stained if ever the need arises. A prefinished solid wood has a 5mm wear layer which can be sanded and stained several times during its lifetime. What most people believe is that prefinished floors cannot be sanded or refinished because of the nature of how they were manufactured.

Prefinished floors refinishing NJ use a special machine for sanding prefinished floors. All their wood technicians are experts and knowledgeable in the work they do and they only use quality wood products to get the job done right. You’ll be surprised how amazingly new and beautiful your prefinished floor looks after the work has been done.

If you are concerned that your prefinished floor might incur damage during the refinishing process, you should consider prefinished floors refinishing NJ. They do not start working on your prefinished floor until they have surveyed it and assessed it if it is capable of repair and refinishing.The quality of the wood used for a prefinished floor affects the outcome of refinishing. There are prefinished floors that are made of very thin wood and needs really great care when refinishing. If the prefinished wood cannot be refinished, their wood experts will advise you on other ways to have a new flooring system that suits your budget.

Prefinished floors refinishing NJ guarantees that you will have the same glory of your prefinished floor the first time you installed it and will cost lesser than the installation price. Sanding a prefinished floor does not take that long because of the special equipment that they are using. You may also choose the color of your prefinished floor during refinishing. There are plenty of shades to choose from so your floor will blend with your home décor.

After the job is done, your floor will look as if it is newly installed. What makes floor refinishing awful are the V-grooves that appear between the boards. This is mostly common in refinished floors but with the technology, proper equipment and expertise of prefinished floors refinishing NJ, your prefinished floors will be very even and really flat. When the finishing is applied, you get a really smooth surface, with gloss and shine that makes it stunning and glamorous.

The reason many prefinished floors end up with cracks and creases is because they are not fully assessed and evaluated before they underwent refinishing. Remember that any type of wood has a limit on how many times it can be sanded. If it has reached its limit, you must not push further as you may just damage the floor further. Prefinished floors refinishing NJ can help you refinish your prefinished floor without having to break them.

If you are looking for information regarding prefinished floors refinishing NJ, you can click on the link. Or visit http://hardwoodfloorsrefinishingnj.com/prefinished-floors-refinishing-nj/ today.

Find More New Floors Articles

How To Repair Damaged Hardwood Floors

by admin

Hardwood floors are beautiful type of flooring material you could install at home. These floors can add appeal to your house. There are several shapes and designs that you can choose from. Some hardwood floors are expensive while others are affordable.

Although they differ in various ways, hardwood floors have the tendency to get damaged. When a part of your floor is damaged it is good to know what to do. Do you need to call an expert to fix it. Ordinary people can actually do the repairs on their hardwood floors. This page will help you learn how to repair a damaged hardwood floor so you could save more money.

First important step is to gather supplies and materials that you need in repairing your hardwood floor. Tools and supplies needed for repairing the damaged floor must be complete so that your job is faster and easier. In case you don’t have complete tools you can run to any local home improvement or hardware store near you and buy those things. You may borrow some tools and supplies from your neighbor if you don’t want to spend money. It is imperative that you have everything you need, tools and materials, before beginning your repair job

Then, you need to cut out damaged boards of your floors. You do not necessarily remove the entire hardwood floors. Make sure that you are only removing the damaged part of the hardwood floor. Removing damaged parts of floors may require you patience but this will help you save money.

And lastly, replace the damaged parts with new boards. Make sure that you have the same type of design and shape of tile as the original hardwood floor you are replacing. Check the size and design of the tile that you are replacing. If new boards are ready then place them on the surface using appropriate tools.

So there you are, the basic steps in repairing your damaged hardwood tiles. You can easily perform the repairing because it is easy and doable. It is very easy to do and will only require a few minutes to an hour depending on the area to be replaced.

Find the best in hardwood floors with us at hardwood flooring San Diego. Where the best installers of hardwood can be found at hardwood installer San Diego.

Do It Yourself ( DIY ) Home Security – Simple for The Beginner

by admin

There are many DIY home security systems as well as individual products available on the open market today that can be installed by the individual homeowner with relative ease and can be purchased through various retail outlets; from basic systems to complex ones that have video surveillance, the particular system you end up buying will depend on your expertise, budget and the perceived threat of intrusion.

Installing window and door contacts is a relatively simple job, which requires some rudimentary knowledge of how low-voltage wiring works, knowing how to handle a few basic hand tools, and an electric drill. DIY home security can have monitors and closed-circuit television cameras that can also be hooked into a digital recorder or a videocassette recorder to record any activity.

As a general word of caution, cameras should never be positioned in areas where your family members or visiting guests have an expectation of privacy. Bedrooms and bathrooms are areas in which the location of cameras should never be setup. DIY home security video surveillance and commonly used areas of your home as well as outdoors is basically excepted, however videotaping in certain areas may cause legal actions which are based on the violation of privacy, even in your own house.

If You Can Afford It, Go Wireless

Numerous devices, which are available as part of a DIY home security system, can be bought in wireless format. This does away with having to install expensive wiring running through your home which makes the DIY faster and easier for you to install. Even the use of cameras are available in a format that is wireless, which gives you the ability to make your installation outdoors without the need to put holes in your outer walls.

If you want to attach your system to a videocassette recorder, you will benefit greatly if you have a time lapse VCR, which has the capability of saving up to 24 hours of recorded video onto a single T-160 tape. The result of this is that the tape only has to be switched once a day. It is a smart choice to also keep at least one weeks amount of video.

While many people who hook up a DIY home security system have said that 24 hours is enough, if there are no disturbances or unlikely occurrences happening then just tape over it, others have the contention that it could be a day or so before it is possibly discovered.

Digital recording devices are the most beneficial in either a DIY home security system or a professional system and if you can equip it with a 600 Mb hard drive, you have the ability to record 24 cameras with the video being available for about 30 days before it begins to record over any previous images. An additional advantage is that the video can be played back through your home computer system and the still images can be outputted through your printer.

Listen to Corbin Newlyn as he shares his insights as an expert author and an avid writer in the field of home security. If you would like to learn more go to Home Security Surveillance and at Home Wireless Network Security

Related Diy Home Articles

Garage Floors Can Now be Protected, Made Beautiful and Functional

by admin

Garage floors are perfect candidates for parking your cars, trucks, and SUVs on. They allow a relatively hard and flat surface for doing projects on. They can take a certain reasonable amount of use and abuse over the years without having to replace it, and they are pretty easy to clean and maintain when there is a mishap. However, garage floors can also become stained, dirty, and even damaged. Of course, these situations can be remedied, but there are also things you can do as a homeowner to seal, protect or even cover the concrete to give it as long a life as possible. Lets take a look at some of the options available to best care for and protect our garage floors.

Since garage floors are meant to be used, it only makes sense to take steps to protect them from damage. Having to repair cracked and broken concrete can be expensive and is easily avoided. Manufacturers have done a good job of making garage floor coverings. For example, there are floor mats that come in various lengths and widths. These are usually made from vinyl and are extremely durable. One of the nice things about this option is that you can easily customize their placement to suit your particular needs. You can even get them in different patterns.

Another product many people choose for protecting garage floors is an epoxy paint coating that is just brushed or rolled on. This type of covering does not give padding or sound insulation like other options, but it does come in various colors and is extremely durable once applied. I have found this option to be perhaps the most practical for many home owners. The process of applying it is somewhat involved, but easily up to the skill level of almost anyone who can read and follow simple instructions. Garage floors benefit from this type of coating because the epoxy acts as a sealant that, once cured, is nearly rock hard, and will protect the floor for years and years. Before applying the epoxy the floor has to be cleaned thoroughly, and several coatings may be required. Some manufacturers even make small texture granules that can be added to give additional traction and looks to the floor.

No discussion of garage floors is complete without a consideration of interlocking rubber tiles. These come in various colors and are great to use if you want to create a customized look and feel to your garage floor. You can interlock each panel together in whatever pattern you find pleasing. Garage floors with this sort of covering look amazing. Think 1950’s black and white checkered floor. Let your imagination go crazy with this product and design something really unique.

So, as you can see, garage floors don’t have to remain dull gray and unprotected any longer. Whether you want to create a fun customized look, or cover and protect the floor from dings and other damage, you now have some really good options in floor coverings. I hope you can discover what will work best for you. Once you find the perfect product, then your floor will be one of thousands of other garage floors that got the covering they needed to look their best.