Pressure wash machines are well known as efficient hard surface
cleaners. It is safe to say that there are no better alternatives than
these machines at present to clean hard surfaces. Cleaning buses and other automobiles does not come strictly
under the category of hard surface cleaning. That is one of the reasons
why it is important to do some research before purchasing bus cleaning
pressure washers.
The following are some useful tips that would help a prospective buyer to make the right choice.
Tip 1: High pressure or low pressureIf you ask any
cleaning industry expert about power washers, you are likely to get a
standard reply that output pressure is the most vital feature of the
machine. They are likely recommend buying a machine with maximum output
pressure. This tip, however, does not help a person who is looking for
bus cleaning pressure washers. The output pressure should not be too low, so as to make the
cleaning inefficient. At the same time, it should not be too high to
cause peeling off of paint from vehicle body.
In short, the best bus cleaning pressure washers should use output pressure over 1500 psi for the fastest results.
Tip 2: Low flow machinesFlow rate is an important
consideration in vehicle cleaning. For an ordinary power washer
machine, the equation is simple. Normally, the higher the pressure
level, the higher the flow rate. For auto detailing in general, the
flow rate should be lower if the job requires mobile cleaning, but bus
or truck cleaning require high pressure and flow rates. Industrial pressure washer machines with high flow rate tend
to deposit more water onto the ground than those emitting a higher flow
of water.
What you need for vehicle cleaning is a commercial pressure
washer with a flow rate as low as possible. Ideally, the flow rate of
the industrial pressure washer for mobile vehicle detailing can be less
than 3 gpm.
Another important aspect is the output temperature of the
pressure washer machine. A hot water pressure washer is perhaps the
most popular choice for auto detailing. Machines that offer steam
output have an even lower flow rate. Either steam or hot water pressure
washer machines are suitable for this task.
Tip 3: Power sourceA pressure washer machine for
cleaning buses can have any kind of usual power source: electricity,
gasoline, propane, or even diesel. One important fact is that gas pressure washer machines
can work anywhere. The same cannot be said about a commercial pressure
washer that runs on electricity. It requires a source of electric power
and may not be suitable for outdoor use, unless you add a portable
generator.
The bottom line is that if you plan to offer mobile bus cleaning service, it is better to opt for gas pressure washer machines. Otherwise, bus cleaning pressure washers with any type of power source would be fine.
Make a wise choice and select the best machine for cleaning buses. Select machines from the best brands and get the best results. Research thoroughly before buying cleaning equipment.
Article Tags:
Cleaning Pressure Washers, Pressure Washer Machines, Cleaning Pressure, Pressure Washers, Cleaning Buses, Output Pressure, Washer Machine, Flow Rate, Pressure Washer, Washer Machines
------------
ABOUT THE AUTHOR
Daimer Industries is a leading supplier of commercial cleaning machines. Daimer provides a complete range of industrial cleaning machines including hot steam pressure washers and many more.