Are you frustrated with your vacuum cleaner keeps on malfunctioning? Wouldn’t it be much better if you can do the vacuum cleaner repair yourself? Of course it would. Not only it will save you a lot of money from repairing works, but you will also gain new knowledge from this effort.

First of all, always check the source of the problem. This is the crucial step in vacuum cleaner repair works. Always consider asking this three questions:-

1) What has causing it to malfunction?

2) How does it happen?

3) Is it easy to repair? (Very important. If it is not, send it to a real specialist)

Failure of the vacuum parts are the only thing that cause a malfunctioning to your vacuum cleaner. If the problem other than this, it will be much better if you send it for repair at electric store. One of the most important vacuum part is the belt. If the belt somehow has been snapped or got stuck around the brush that is located inside the vacuum cleaner, then you know that the belt is not working properly anymore.

You have to clear all the dust, debris, dirt and hair that got stucked on the vacuum agitator brush if you want to do the repair work by yourself. In order to do this, cut the damage belt with a new belt and screw the plate back to its original position.

For a bagged vacuum cleaner, you should change and replace it with a new one quickly after the bag is full. The dirt will cloak the hose when the bag is fully overloaded if you forget to change the bag and you have to spend unnecessary cost to repair it where you can avoid this in the first place.

In times, the suction power of vacuum cleaner will slowly reduce due to frequent use. You might think it is due to bag overloaded but after you have changed it, the suction power is still weak. To make things right, check inside the hose. There might be something slightly bigger than the hose that block the circulation of the vacuum cleaner. Use a small stick or broom that can fit inside the hose and push it out.

If you have read this article carefully, there are only 3 things that cause the malfunctioning of a vacuum cleaner:-

1) Damage belt

2) Agitator brush problem

3) Blockage of the host

Now it’s time to start putting these knowledge into action. As you can see, vacuum cleaner repair works are not that complicated at all. It is just a simple straight forward of solving a problem.