Repainting Your Room: How To Properly Mix Paint

Repainting your home or your house is a fun project that you can do with your family and friends. You may use some of your left-over paints and newer ones to complete this project. Don’t forget, however, to consider your existing home decors or design when doing this. Here’s a step-by-step guide that you can follow to create a perfect color.

1. Experiment With Colors

This is a way to understand mixing and colors. You can begin by experimenting with small quantities of paints. Keep in mind, however, the color theory. For instance, when you mix some primary colors, you create secondary colors. A good example would be this: mix red and yellow and you get the color orange. In addition, when you mix a primary color with a secondary color, you get another good color. For example, when you add yellow to a mixture of yellow and blue, you get lime green.

So, you have to familiarize yourself with this before you start mixing different colors. Doing so will save you time and paint.

2. Remember The Colors That You Add

Make sure that you always keep track of the color and the quantities of the paint that you add. This way, you can recreate the shade that you’ve produced.

Also remember that one way to lighten whatever color you have created is to add white. At the same time, adding black will also give you darker version of the color that you came up with.

3. Test The Paint

Once you’ve created a color that you really want, don’t hurry into painting the entire room with it. Instead, try it out on a sheet of paper or a small area of the wall. Allow it to dry for a few hours and then you can decide if this is what you want.

You need to test it because the color of the wet mixture does not always appear the same when it’s already dry. A lot of people rush into painting their wall only to realize later that they’ve made a huge mistake. So, you’re left with two unsatisfactory options: leave it as it is or repaint the wall again.

4. Recreate The Color

This what makes step 2 very important. You can’t recreate the color that you’ve come up with unless you’ve kept track of the colors you added as well as the quantities you used.

When you know the colors that you used to come up with the color that you like recreate it but this time, use paint in greater quantity. Give yourself enough time and patience to complete this task.

However, if you’re only using left-over paint and you don’t have enough paint to complete the project, don’t worry. You can bring the shade that you’ve come up with to a professional. Buy new paints and have it mixed professionally.

You can have your paint mixed professionally so that you’ll get a perfect shade of the color that you want. A good interior designer can also help you with this. Click here if you’re looking for an interior designer or you can visit http://www.plumbinteriordesign.com.au/

More Repainting Home Articles

Paint your home yourself. Here are a few tips.

You can paint your home yourself and this is not difficult as you think. Here is an approach, which you can follow to do the painting with no difficulty.

Get organized:

Before the start, you should plan the approach because many works can be done a day or more prior to the actual start of the work.

The first approach is moving the obstructions away from the wall and ceiling so that you can paint faster with fewer mistakes.

Before painting the walls, move all the furniture from the room so that you can paint easily with no hindrance. If you have large furnishings, you can pile them at the center of the room and cover them with drop clothes. Remove all the chandeliers from the ceiling so that you can paint the ceiling faster and more smoothly. Handle the floor area with care to reduce the later work. Use drop clothes and cover them and allocate an area where you can gather the tools which will be used to mix the paint and work.

Top down approach is the best way to paint the wall and this helps you to correct the drips and runs. If you are planning to paint a room or a hall, start with the ceiling and then go to the walls. Always start painting the larger areas before repainting the trim by this you can cover more areas and finish it quickly. This may end up with roller sprays, overspray and brush strokes.

Scrape away the old peeling paints and the rough sand painted woodworks to get rid of the glossy surfaces and get them ready for the new paint. Before repainting, use a sealer to give a makeover to the high-gloss enamel paints. Fix the cracks and chips in the wall before painting. Do patch works to fix the imperfections. Remove all electrical switches, wall sconces, picture hangers and other covers. Cover the windows and woodwork with painters tape to mask around them.

Get organized with the materials:

Choose the right brush and roller to do the right job. Choose rollers in such a way that the more the surface is rougher, more the length of the roller should be. Use synthetic brushes and rollers for latex or water-based paint. Use natural or synthetic brushes for oil-based paint. When you work with the paint, make sure that you stir the paint with a stick or mix it frequently to avoid pigments from settling down.

Materials usage:

Brushes are available in different sizes and depending on the usage and area you can buy them. For doors and windows, trim brushes are to be used. Dip the brush into the paint in such a way that the bristles are dipped one-third of the way into the paint. Squeeze out the excess paint on the bristles’ surface before using it to avoid brush marks.

Do not forget to cover your hair with a scarf and protect your eyes with protective eyewear. Importantly, cover all the areas so that you can provide a uniform look to the wall.
Now, once you finish painting, remove the tape from the trim and paint it.
Once you are done with the painting, clean the brushes and the rollers.

Shasthri, a postgraduate in finance management, is a financial advisor for a leading firm. His interests are investing, cricket and chess. He writes for indiaproperty.com .